Phone:954-442-1066 (09:00 AM - 5:00 PM, EST)
Menu
Pentair Pinnacle Pump Parts Diagram
Pentair Pinnacle Pump
The Pentair Pinnacle pool pump has been around a very long time, originally built by Pac Fab / Purex, which was bought by American Products and subsequently bought by Pentair.
Pentair Pinnacle Pump Parts Diagram
Pentair Pinnacle pump parts list for easy ordering of parts for your Pentair SuperFlo Pump. American Products is a trademark of Pentair Pool Products
Pentair Pinnacle Pump Parts List
Pentair Pinnacle Pumps
Key |
Model |
Description | SKU # |
Purchase |
Important: HP x Service Factor Must Equal Or Exceed what you are replacing |
||||
1 |
35537!1S |
Square Flange Motor, 3/4 HP, 115/230 Volts, Service Factor 1.95 | MO-00270 |
|
075232S |
Square Flange Motor, 3/4 HP, 115/230 Volts, Service Factor 1.65 | |||
355339S |
Square Flange Motor, 1.0 HP, 115/230 Volts, Service Factor 1.25 | |||
075233S |
Square Flange Motor, 1.0 HP, 115/230 Volts, Service Factor 1.65 | |||
355340S |
Square Flange Motor, 1.5 HP, 115/230 Volts, Service Factor 1.10 | |||
075234S |
Square Flange Motor, 1.5 HP, 115/230 Volts, Service Factor 1.50 | |||
355342S |
Square Flange Motor, 2.0 HP, 115/230 Volts, Service Factor | |||
075235S |
Square Flange Motor, 2.0 HP, 115/230 Volts, Service Factor | |||
356438S |
C-Flange Motor, 3/4 HP, 115 Volts, Service Factor 1.95 | |||
356439S |
C-Flange Motor, 1.0 HP, 115 Volts, Service Factor 1.95 | |||
356440S |
C-Flange Motor, 1.5 HP, 115 / 230 Volts, Service Factor 1.95 | |||
2 |
354290 |
Hex Head Screw, 3/8,16 | PU-18235 |
|
3 |
3556666 | Seal Bracket, Thru Bolt Motor | NLA | |
3A |
356012 |
Seal Plate | PU-18220 |
|
4 |
355619 |
O-Ring | PU-04104 |
|
5 |
355385 |
Motor Support, 48 Frame Motors | PU-18236 |
|
6 |
355613 |
Pump Base | PU-18237 |
|
7 |
354545 |
Seal, Generic | PU-04120 |
|
8 |
355258 |
Impeller, 3/4 HP, See 355043 | PU-18200 |
|
355263 |
Impeller 1 HP Uprated | NLA | ||
355278 |
Impeller, 1.5 HP Uprated, See 355074 | PU-18202 |
||
355225 |
Impeller, 2.0 HP Uprated | PU-18239 |
||
8A |
355043 |
Impeller, 0.5 HP Full, 0.75 Uprated, After November 1994 | PU-18200 |
|
355067 |
Impeller, 0.75 HP Full, 1.0 Uprated, After November 1994 | PU-18201 |
||
355074 |
Impeller, 1.0 HP Full, 1.5 Uprated, After November 1994 | PU-18202 |
||
9 |
355389 |
Impeller Locking Screw | PU-04120 |
|
10 |
355618 |
Difuser, 1.0 Full and 1.5 HP Uprated, After November 1994 | PU-18233 |
|
355617 |
Difuser, 1/2, 3/4 Full and 3/4, 1.0 HP Uprated, After November 1994 | PU-18232 |
||
11 |
355334 |
Screw 8-32 Hex Washer 3/8, 16 | PU-18231 |
|
12 |
355030 |
Seal Diffuser | PU-18230 |
|
13 |
355301 |
Lid, Strainer Pot, Clear | PU-18213 |
|
354112 |
Lid, Strainer Pot, Black, Chemical Resistant | PU-18240 |
||
14 |
350013 | Lid O-Ring | PU-19024 |
|
15 |
355667 |
Basket | BA-355667 |
|
16 |
356002 |
Pump Housing, Almond | PU-18241 |
|
17 |
072184 |
Washer, 3/8 Inch, SS, 4 Required, Sold Each | PU-19261 |
|
18 |
355621 |
Screw 3/4-16 x 2.25 Inches Hex Head, 4 Required, Sold Each | PU-18228 |
|
19 |
192115 |
O-Ring Drain Plug | PU-19123 |
|
20 |
071131 |
Drain Plug, 2 Required, Sold Each | PU-19117 |
|
Notice / Important: When adding items to the shopping cart from this page, please make sure that the item added is the same as listed on this page. Occasionally part numbers will change and will not be reflected on this page
|